The Wrekin VIH10 is a deluxe filter housing with a built in Isolating valve with 3 Positions

• Filter - filter in service
• Off - Isolates water supply to tap for filter change
• Bypass - Allows water flow without going through the filter

Installation notes

The VIH10 can be fitted on the incoming supply to a house or on the cold feed to a particular appliance. The choice of location is dependent on the type of cartridge being used. With this unit it is not necessary to fit isolating valves to allow cartridge change as the unit has its own non-return to allow easy filter change

Maintenance

Cartridges should be replaced in accordance with the individual chosen filters recommendation. However filter life is dependent on the quality of the incoming water and the amount of water used.

What's included

1) Filter Housing
2) Bracket c/w screws
3) 8 Slot Spanner
4) 2 x 3/4x3/4 BSP Thread Nipples
5) Fixing Bracket
6) 1 x CB1 Carbon Block Cartridge

Ideal for the smaller house - 1 bathroom or on a traditional open vented system.

Flow Rate up to 23 lpm

Dimensions of the housing are

Height = 330mm with bracket
Width = 115mm (Not including connectors) 175mm Including Connectors.
Depth = 125mm